Healthcare Provider Update: Healthcare Provider for Schneider National: Schneider National primarily utilizes UnitedHealthcare as its healthcare provider for employee health benefits. UnitedHealthcare is renowned for offering a range of health insurance plans, including those that cater to commercial trucking and logistics companies through tailored healthcare solutions. Potential Healthcare Cost Increases in 2026: As we move toward 2026, Schneider National, like many employers, may face significant healthcare cost increases primarily due to anticipated premium hikes in the ACA marketplace. With some states expected to see increases over 60%, and the loss of enhanced federal premium subsidies looming, employees could experience out-of-pocket premium costs rising by as much as 75%. This alarming trend stems from escalating medical costs and the financial pressures on insurers, which may lead to tougher choices for companies in managing benefits while ensuring their workforce stays adequately covered. Click here to learn more
What is 72(t)?
72(t) payments, also known as “substantially equal periodic payments,” are advantageous because they are exempt from the 10% early distribution penalty that usually applies to withdrawals before age 59 ½. You can take them from an IRA at any time, but only from a workplace plan after leaving Schneider National.
Lets start with the downsides to 72(t) payments.
- First, they must remain in place for at least 5 years or until age 59 ½, whichever comes later. This means a 45-year old IRA owner must maintain her payments for almost 15 years.
- Second, if the payments are modified before the end of the 5-year/age 59 ½ duration, you are subject to a 10% penalty (plus interest) on all payments made before 59 ½. Modification will normally occur if you change the payment schedule (e.g., stop payments), change the balance of the account from which payments are being made (e.g., a rollover to the account), or change the method used to calculate the payment schedule (except for a one-time switch to the RMD method – see below).
There are three acceptable ways to calculate 72(t) payments:
- The required minimum distribution (RMD) method. Payments are calculated like lifetime RMDs. Therefore, they fluctuate each year. The RMD method normally produces the smallest payout among the three methods. Once you use the RMD method, you can’t switch out of it.
- The fixed amortization method. Payments are calculated like fixed mortgage payments. After using this method for at least one year, you can switch to the RMD method without penalty.
- The fixed annuitization method. Payments are calculated by dividing the account balance by an annuity factor. Like the amortization method, they remain fixed, and you can switch to the RMD method after the first year.
IRC Section 72(t)(4)(A) provides that once an individual begins to take 72(t) distributions from a Schneider National-sponsored retirement account, they must continue doing so over the longer of 5 years or until they reach age 59 ½ (exception death or disability).
For example, while an individual beginning to take 72(t) distributions at age 57 will ‘only’ have to maintain their distribution schedule for 5 years (because even though they would turn 59 ½ after 2 ½ years, the payment schedule must be kept for a minimum of 5 years), a taxpayer who begins such distributions at age 40 would have to maintain the schedule for nearly two decades (since they would not turn 59 ½ for another 19 ½ years)
After starting a series of 72(t) payments, the penalties for changing or canceling the payment schedule can be steep. IRC Section 72(t)(4)(A) provides that in the event a taxpayer modifies their 72(t)-payment schedule before either the end of the 5-year period or reaching age 59 ½ (whichever comes later), the 10% early distribution penalty will be retroactively applied to all pre-tax distributions taken prior to age 59 ½.
Furthermore, in these cases, the IRS will also retroactively apply interest to those amounts – that is, treating the penalty as if it had been applied at the time of distribution but had not yet been paid.
Penalties Are Steep
Example 1:
In 2010, at the age of 44, Mark established a 72(t)-payment schedule to make periodic distributions from his Traditional IRA. Per the 72(t) rules, the schedule was set to conclude in 2025, when Mark turns 59 ½.
Unfortunately, after properly taking distributions for a decade, in 2021 Mark (at age 55) completely forgot to take his annual 72(t) distribution, thus ‘breaking’ the schedule.
As a result of the error, the 10% penalty will be retroactively applied to all of Marks’ prior distributions, from the first one in 2010 to the most recent in 2021.
Additionally, interest will apply to the 2010 10% penalty amount as though the amount had always been owed since 2010, but had not yet been paid, resulting in 10 years’ worth of interest applied to the 2010 payment. Similarly, interest will apply to the 2011 10% penalty amount as though the amount had always been owed since 2011, but had not yet been paid, resulting in 9 years’ worth of interest applied to the 2011 payment. And so on.
The makeover is the second and third methods require use of an interest rate to calculate the amortization or annuity factor. In the past, the IRS has said this factor can’t exceed 120% of the Federal mid-term rate in effect for either of the two months before the start of the 72(t) payments. The Federal mid-term has been historically low for a number of years. For February 2022, 120% of the Federal mid-term rate is only 1.69%.
72(t) Changes
Clearly, getting the timing of 72(t) payments correct is critical for avoiding early distribution penalties, along with correctly calculating the payment amount(s). Interestingly, the Internal Revenue Code itself provides little guidance on how to properly calculate 72(t) distributions, other than to state that they must be “substantially equal” (in fact, the excerpt above, from IRC Section 72(t)(2)(iv), is the entirety of the Internal Revenue Code’s guidance). Thus, nearly all of the guidance that we do have, with respect to how to calculate 72(t) payments, comes from other sources such as IRS Notices.
On January 18, 2022, the IRS released Notice 2022-6, which said that 72(t) payment schedules starting in 2022 or later can use an interest rate as high as 5%. (And, if 120% of the Federal mid-term rate rises above 5%, you can use a rate as high as the 120% rate.) This is great news because the higher the interest rate, the higher the payments will be. This change allows you to squeeze higher payments out of the same IRA balance.
Note: You can’t change interest rates for a series of 72(t) payments already in place.
Additionally, the 5% rate limit is effective for any series of payments starting in 2022 or later.
This is significant for anyone employed by Schneider National who are thinking about beginning a 72(t) schedule, since it significantly increases the maximum interest rate that can be used (and therefore the number of penalty-free distributions that can potentially be made before age 59 ½)
Consider, for instance, the rate for October 2022 was 3.90% . Prior to the new guidance from Notice 2022-6, taxpayers beginning 72(t) schedules in November 2022 with distributions calculated using either the amortization or annuitization methods would have been limited to using an interest rate of no more than 3.90% (the higher rate from the two months prior to the month when the schedule began).
Example 2:
Featured Video
Articles you may find interesting:
- Corporate Employees: 8 Factors When Choosing a Mutual Fund
- Use of Escrow Accounts: Divorce
- Medicare Open Enrollment for Corporate Employees: Cost Changes in 2024!
- Stages of Retirement for Corporate Employees
- 7 Things to Consider Before Leaving Your Company
- How Are Workers Impacted by Inflation & Rising Interest Rates?
- Lump-Sum vs Annuity and Rising Interest Rates
- Internal Revenue Code Section 409A (Governing Nonqualified Deferred Compensation Plans)
- Corporate Employees: Do NOT Believe These 6 Retirement Myths!
- 401K, Social Security, Pension – How to Maximize Your Options
- Have You Looked at Your 401(k) Plan Recently?
- 11 Questions You Should Ask Yourself When Planning for Retirement
- Worst Month of Layoffs In Over a Year!
- Corporate Employees: 8 Factors When Choosing a Mutual Fund
- Use of Escrow Accounts: Divorce
- Medicare Open Enrollment for Corporate Employees: Cost Changes in 2024!
- Stages of Retirement for Corporate Employees
- 7 Things to Consider Before Leaving Your Company
- How Are Workers Impacted by Inflation & Rising Interest Rates?
- Lump-Sum vs Annuity and Rising Interest Rates
- Internal Revenue Code Section 409A (Governing Nonqualified Deferred Compensation Plans)
- Corporate Employees: Do NOT Believe These 6 Retirement Myths!
- 401K, Social Security, Pension – How to Maximize Your Options
- Have You Looked at Your 401(k) Plan Recently?
- 11 Questions You Should Ask Yourself When Planning for Retirement
- Worst Month of Layoffs In Over a Year!
Jennifer, age 50, has recently decided to use 72(t) payments as a way to access her IRA funds without incurring an early distribution penalty, and plans to make a series of annual distributions from her IRA starting in March 2022.Jennifer’s current IRA balance is $1 million.
Unfortunately, Jennifer is not aware of the new rules provided by Notice 2022-6 and calculates her maximum annual 72(t) payment using the 3.90% pre-Notice 2022-6 maximum rate.
After using each of the three methods and available life expectancy tables to calculate her potential maximum annual 72(t) distribution, Isabelle determines that the amortization method yields the highest possible annual 72(t) distribution of using 3.90%.
However, thanks to Notice 2022-6, retirees are now able to use an interest rate of 5% instead, producing a significantly higher 72(t) distribution from the same account balance than was possible under the previous rule.
Example 3:
Doug, Jennifer’s co-worker, has recently decided to use 72(t) payments to access his IRA funds without a penalty. And he, too, has a current IRA balance of $1 million.
Thankfully for Doug, his advisor is aware of the new 5% interest rate limit for 72(t) and uses it to calculate his maximum annual 72(t) payment, to begin in November 2022.
After using each of the three methods and available life expectancy tables to calculate her potential maximum annual 72(t) distribution, Doug determines that the amortization method yields the highest possible annual 72(t) distribution of $60,312.23, a substantial increase over the 3.90% under the old rules
Common 72(t) Questions
When can I start 72(t)?
You can decide to start taking 72(t) payments from your IRA at any age.
How long do I have to maintain the withdrawals?
The payments must continue for at least five years or until you are age 59 ½, whichever period is longer.
How often do I have to take withdrawals?
You must take the payments at least annually.
Can I start 72(t) payments from my 401(k) ?
The 72(t) payment plan is only applicable to the IRA or IRAs from which you calculated your initial payment. Before setting up a 72(t) payment plan, you can split your IRA into two IRAs, if that best meets your needs. You can use one IRA to calculate and take your 72(t) payments, while the other can remain available for future non-72(t) use.
How do I calculate payments?
The IRS has approved three methods for calculating 72(t) payments. Those methods are the required minimum distribution (RMD) method, the amortization method, and the annuity factor method. The RMD method will produce smaller payments than the other two methods to start out. While other methods of calculating the payments are not prohibited, it would be extremely risky to use some other method that is not officially approved by the IRS. You should generally consult with a tax or financial advisor to calculate your 72(t) payments.
Can I change my method once I start 72(t) ?
You can switch to the RMD method from either the amortization or the annuity factor method. This is a one-time irrevocable switch and you must use the RMD method for the remainder of the schedule.
Can I stop my 72(t) payment?
If you do not stick to your 72(t) payment plan, or if you modify the payments, they will no longer qualify for the exemption from the 10% penalty. Here is some even worse news; the 10% will be reinstated retroactively to all the distributions you have taken prior to age 59½.
Can I take an extra 72(t) withdrawal because of an emergency?
An extra withdrawal is considered a modification of the payment schedule. Any change in the account balance other than by regular gains and losses or 72(t) distributions, will be also considered a modification and the 10% penalty will be triggered. This means that you cannot add funds to your IRA either through rollovers or contributions.
10. You may not roll over or convert your 72(t) payments.
What are the eligibility criteria for employees to participate in the Schneider Electric pension plan, and how do these criteria vary for salaried and hourly employees of Schneider Electric? In your answer, please elaborate on the implications of the different eligibility dates and any exceptions that may apply, such as coverage under collective bargaining agreements or participation in other retirement plans maintained by Schneider Electric.
Salaried and Hourly Employees: Eligible employees include those hired before January 1, 2006. Salaried employees become plan members the January 1 after joining the company if they are scheduled to work at least 17.5 hours per week, or if working less but completing 1,000 hours in a year. Hourly employees become members upon completing one hour of service. Exceptions: Employees hired or rehired after December 31, 2005, those covered under a collective bargaining agreement unless specified otherwise, and employees currently accruing benefits under another qualified company plan are ineligible.
How does the Schneider Electric pension plan calculate the monthly retirement benefit for participants, and what factors contribute to the final benefit amount? Discuss the importance of years of service, salary history, and the effect of any early or late retirement provisions on the final pension benefit.
The pension benefit for salaried employees is calculated using a formula considering years of benefit service, average monthly compensation, and covered compensation as of December 31, 2009. The benefit depends on the retirement age, chosen benefit payment form, and if benefits are received under another company plan. For hourly employees, the pension benefit is determined by the years of benefit service as of December 31, 2009, and a pension rate effective at that time.
What options are available for employees of Schneider Electric regarding spousal benefits under the pension plan, particularly if a participant passes away before or after retirement? In answering this question, detail how these options could affect survivors' financial stability and the importance of proper beneficiary designations during an employee's tenure at Schneider Electric.
Pre-Retirement: If an employee dies before pension payments start, the surviving spouse may receive a monthly death benefit at the employee’s normal retirement date, with payments potentially starting as early as the employee's 55th birthday. Post-Retirement: Joint and survivor annuity options are available, which provide continuing income to the spouse after the participant's death. The benefit amount is adjusted based on the selected payment option.
What procedures must be followed by Schneider Electric employees to initiate the retirement process and apply for pension benefits? Include in your discussion the timeframes and eligibility requirements for different retirement options, and highlight the consequences of failing to comply with these processes.
Employees must actively apply for pension benefits through the Schneider Electric Retiree Benefits Center. The application should be made close to the retirement date but no later than 90 days prior. The process includes choosing a payment method and, if applicable, obtaining spousal consent for certain payment options.
How does Schneider Electric ensure that benefits under its pension plan comply with the regulations set forth in ERISA, and what protections are offered to plan participants regarding benefit entitlement? Discuss the implications of these regulations and how they safeguard the interests of Schneider Electric employees.
The plan is designed to comply with the Employee Retirement Income Security Act (ERISA), offering protections like vesting rights and fiduciary standards to ensure benefit security. Participants are entitled to a fair process for benefit claims and appeals.
What steps can Schneider Electric employees take if their claim for pension benefits is denied, and what rights do they have under ERISA to appeal such denials? Explain the importance of understanding the claims review process and the role that documentation plays in successfully navigating benefits disputes.
If a pension claim is denied, participants can appeal the decision by following the process outlined in the plan document, which includes a review and potentially an adjustment of the claim.
How does the Schneider Electric pension plan handle the calculation of benefits for employees who were re-hired after a break in service? In addressing this question, explore the effect of prior service on future benefits and the rules governing vesting and accrual for these employees as stated in the plan.
Re-hired employees retain their previously earned benefits as of December 31, 2009, but they do not accrue additional benefits. If re-hired after a break and not fully vested, previous service may count towards vesting upon return, depending on the duration of the break in service.
What is the significance of the Pension Benefit Guaranty Corporation (PBGC) in the context of Schneider Electric's pension plan, and how does it provide an additional layer of security for employees’ retirement benefits? Discuss how the PBGC's involvement affects participants’ perceptions of the safety and reliability of their pension benefits.
PBGC provides an insurance backstop that guarantees continuous payment of earned pension benefits up to legal limits in the event the plan fails financially, enhancing the security of the pension for employees.
What considerations must employees of Schneider Electric keep in mind when planning for early retirement, especially concerning the benefit reduction factors that apply? Elaborate on how consistent planning and understanding of these factors can influence an employee’s financial readiness for retirement.
Employees can elect early retirement beginning at age 55 with at least 10 years of vesting service. However, benefits are reduced based on how early the retirement starts relative to the normal retirement age.
How can Schneider Electric employees contact the company to obtain more information about the pension plan and retirement benefits? Detail the available resources, including specific contact numbers and web links, ensuring that employees know where to direct their inquiries regarding the Schneider Electric pension plan.
Employees can contact the Schneider Electric Retiree Benefits Center at 1-800-964-8843 for information about their pension plan and benefits, or access details online at the provided portal.